• View Option
• Grid view
• List view

Romar III  has reverse cycle A/C and features two cabins and one head & Shower compartment. 

Forward V Berth 

Starting forward there is  a large V-berth (6'6" x 5'0"). This cabin is totally private, separated by a door from the main salon. In addition to the large berth you have a hanging locker and additional storage under the bunk.

Main Salon & Galley 

Just aft of the forward cabin you have the main salon. The salon features port and starboard settees (6'3" long), a centerline table, and lockers along the hull and storage lockers under the settees. Aft of the salon to port you find the galley. 

Aft Cabin & Head

Aft cabin is to port just behind the galley. This cabin has a large double berth (6'4" x 6'6"), lockers along the hull and a hanging locker. Custom shades for hatches, screens for hatches and opening ports. The head is located to starboard and is quite spacious. 

• Two burner Propane stove and oven
• Adler Barbour Refrigerator
• H/C pressure water
• SS sink

• NEW Garmin Echomap GPS / Chartplotter (2023)
• NEW Raymarine  -  Wind / Speed Depth Instruments (2023)
• NEW Fusion Bluetooth Radio  (2023)
• Standard Horizon VHF Radio at Nav Station and Helm

• Xantrex Inverter Battery charger
• (4) NEW Group 27 AGM batteries   (2022)
• 110V AC electrical system
• 12V DC electrical system
• 30AMP Shore Power Cables

      __________________________________________

• Yanmar 2GM20F  Diesel  (1226 original Hours)
• Wheel steering (Folding)
• Marine head with 13 gal holding
• Freshwater cooled diesel engine
• 12 volt bilge pump
• Manual bilge pump

• NEW  In Mast Furling Mainsail  (2023)
• NEW  Precision Sail 135% Roller Furling Genoa (2023)
• Inboard genoa track
• Lewmar self-tailing primary winches
• Lewmar self-tailing cabin top winches
• Traveler
• All control lines are led aft to the cockpit to line clutches

• Optional lifting keel w/ Twin Rudders  (2'7" draft UP / 7'1" Down)
• Bottom painted and Hull Detailed  (May 2023) 
• NEW Sunbrella Bimini and Dodger (2023)
• Deck Awning 
• Swim platform with ladder
• Transom shower
• Bow pulpit w/rails
• Side stanchions w/lifelines
• Anchor roller
• Cockpit table
• Cockpit cushions
  

Designed by Groupe Finot, the Beneteau 311 is fast and comfortable and has many of the characteristics that one might expect from much larger boats. The powerful hull (that of the Beneteau First Class Fiagro) along with Beneteau's integral molded grid structure, combine to create an extremely strong and stiff structure. The deck layout is simple and efficient. The large cockpit has slatted teak seats and is completely uncluttered (the mainsheet traveler is on the coachroof, with rigid boom vang) and the genoa sheet winches are within easy reach of the helm.

Since the external ballast - keel assembly remains permanently under the hull, the weight of the retractable keel can be kept down to a moderate 660 lbs. A simple mechanical jack raises and lowers the keel. At low tide, the Beneteau 311 rests on the forward part of the external ballast sole and on the two solid rudders (strengthened for this purpose), creating a highly stable tripod.

Below deck and to port is the galley with gimbaled stove, stainless steel sink with pressurized hot and cold water, and plenty of storage. To starboard there is a large head with marine toilet and wash basin, shower with pressurized hot and cold water, a hanging locker, and plenty of room to store sundries. To starboard is a large navigation table. Electronics can be easily seen from the bulkhead. The symmetrical salon consists of two settees flanking a large drop-leaf table. The 311 has two cabins - forward and aft. The private forward cabin has a V-berth (6-feet 5-inches by 4-feet 6-inches), a large hanging locker, and lots of storage along the side of the hull; the aft cabin is also generous in size with plenty of room for storage.