Edwards Yacht Sales

1984 Kanter Atlantic Pilothouse Cutter

  • 50 ft
  • Cruiser
  • Panama City, FL, US

Yacht price

$130,000
Sold
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter
  • 1984 Kanter Atlantic Pilothouse Cutter

Overview

You Must See This Boat For Yourself!

**Click On The Video Link Above**

Constantly Upgraded and Proven Circumnavigating Voyager

This much value doesn't come along often.  This Ted Brewer center cockpit design is a true passagemaker.  She was built by the well-respected metal boat builder, Kanter Marine of Ontario Canada.  Kanter Marine is still building metal boats designed to last a lifetime today.  Her steel hull construction is powerful and proven.  She is priced to sell. 

She was designed and constructed to be a world voyager and has already successfully circumnavigated the globe.  In 2009-2010, she sailed across the Atlantic again.  During that time, she was cruised in Europe and ultimately the lower half of the Caribbean.   Her present owners have enjoyed year-round cruising of Florida and the Bahamas.  She is set up for total independence and comfort while enjoying far away anchorages around the globe. 

Adagio was just hauled out in 2014.  Her bottom side was sandblasted, primed and repainted.  

She is heavily equipped, but some highlights include:

  • Ford Sabre Diesel freshly rebuilt in 2015!!
  • 480 Gallon Fuel Capacity
  • Electric in-mast furling controlled with foot switches in cockpit  
  • Numerous redundant electrical and electronic systems 
  • Central Air Conditioning 
  • 6.5KW Phasor Generator (2016 hours)
  • Six Solar Panels w/ two MPPT controllers 
  • Two Wind Generators
  • Spectra Watermaker (12GPH on 12V)
  • Maxprop folding 3 blade propeller (NEW 2013)
  • Achilles w/ 10' Dinghy w/ 20HP outboard
  • Heavy Stainless Steel tube lifelines
  • 720AH gel house bank (8) 6V batteries
  • Deck Repainted July 2015
  • Chairs Recovered 2015
  • All New Carpet 2015
  • New ProFurl Furler 2015
  • Recent Survey Available
Disclaimer: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his/her agents, or his/her surveyors, to instigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.(4940013)

Specifications

Basic Information

Manufacturer:
Kanter
Model:
Atlantic Pilothouse Cutter
Year:
1984
Category:
Sail
Condition:
Used
Location:
Panama City, FL, US
Available for sale in U.S. waters:
Yes
Vessel Name:
Adagio
Boat Type:
Cruiser
Hull Material:
Steel
Hull Type:
Hull Color:
HIN:
Designer:
Flag of Registry:

Dimensions & Weight

Length:
50 ft - 15.24 meter
LOA:
50 ft - 15.24 meter
Beam:
13 ft 10 in - 4.22 meter
Draft - max:
7 ft - 2.13 meter
Bridge Clearance:
64 ft 10 in - 19.76 meter
Dry Weight:
-

Engine

Make:
Ford
Model:
Sabre
Engine(s):
1
Hours:
15
Cruise Speed:
-
Range:
-
Joystick Control:
No
Engine Type:
Inboard
Drive Type:
Fuel Type:
Diesel
Horsepower:
80 (Individual), 80 (combined)
Max Speed:
-

Tank Capacities

Fuel Tank:
480 gallons - 1 tank(s)
Fresh Water Tank:
200 gallons - 1 tank(s)
Holding Tank:
-

Accommodations

Total Cabins:
3
Total Berths:
2
Total Sleeps:
-
Total Heads:
1
Captains Cabin:
No
Crew Cabins:
-
Crew Berths:
-
Crew Sleeps:
-
Crew Heads:
-

Gallery

Descriptions

Accommodations

This pilothouse design creates a large interior space with plenty of headroom.  The interior helm and nav station is just down the companionway steps to starboard.  The large nav station features a long desk with two swiveling chairs.  To Port, there is a large U-shaped settee with wrap-around seating.  Access to the large engine room is through hinged lift up floor sections.  Moving forward, and down a few steps, you will find the large u-shaped galley to port and an opposing dinette to starboard.  Forward of the galley is a large pullman berth to port and a private stateroom with v-berth all the way forward.  Opposite the pullman berth is home to a guest head that is currently converted into storage space.  All the way forward is a large workshop with work benches and plenty of storage. 

The master stateroom is all the way aft, and features a queen sized berth with private head and separate shower. 



Galley

The large sea-going U-shaped galley is designed to be comfortable and functional under sail.  There is generous space devoted to the built-in refrigeration and freezer compartments.  The vast counter-space is finished in white Formica. 

  • Nautic-Kold 12V cold plate refrigeration and freezer (fresh water cooled through water tanks- Not salt water)
  • Spectra Watermaker (12 GPH at 12V)
  • Full-size Microwave
  • Broadwater stainless steel 4 burner range and oven
  • Deep stainless sink w/ dish drying area
  • Plenty of storage for food and cooking equipment 
  • Hot and cold pressurized water
  • Fresh water filter system
  • 6 gallon water heater
  • (2) 20lb propane tanks


Dinette

The dinette is located to starboard, opposite to the galley.  There is seating for 4 on two upholstered bench seats.  The table is solid teak, with large bookshelves above and custom globe built into the bulkhead.  



Deck Equipment

Adagio was designed by Ted Brewer.  She was just hauled out in 2014, and the wetted surface of the hull was sandblasted, refitted, primed and repainted with anti-fouling (Ultima SR60 Ablative).  The hull is 3/16" mild steel with a substantial welded steel rub-rail, long fin keel with internal lead ballast, and skeg hung rudder with protected propeller.  In 1999 stainless steel tubing (not wire) was added to make the lifelines completely secure.  There is no exterior teak to maintain.

  • Custom hard dodger/ doghouse built in New Zealand w/ heavy opening glass windshield and rain catcher.  Full standing headroom. (Repainted 2015)
  • Non-skid deck coating (Repainted 2015)
  • Stainless steel tubing for lifelines (not wire)
  • Stainless dinghy davits 
  • Stainless steel arch w/ antennas, wind generators, and two solar panels.
  • Four Solar panels mounted on doghouse
  • Outboard motor hoist
  • Stainless boarding ladder
  • Two dorade vents 
  • Shadetree custom sun awning
  • Two large fiberglass dock boxes
  • Massive lazarette on stern
  • Stainless grab rails
  • 8 opening hatches


Ground Tackle
  • Lighthouse 150 stainless steel electric windlass w/ foot switches
  • Chain counter mounted in cockpit
  • 100lb Delta w/ 150' chain 
  • 100lb Plow Anchor w/ 300' chain 
  • 80lb Plow anchor 
  • FX-37 Fortress anchor 
  • FX-23 Fortress anchor 
  • Large chain locker
  • Heavy duty stainless steel double bow roller
  • Washdown port


Sails and Rigging
  • Hood stowaway in-mast furling system. Electric drive motor with manual override.  Foot switches control sail from the cockpit.
  • Cutter rigged 
  • Deck stepped 64' 10" main mast
  • ProFurl Furlers on Jib and Staysail (staysail furler NEW 2015)
  • Standing Rigging replaced in 2005
  • Two Mainsail's (Mack and Hood, good condition)
  • Two 130% Genoa's (Mack and Hood, average condition)
  • Mack Sails Staysail
  • Profurl furlers on both headsails
  • Spinnaker pole (can be used as whisker pole)
  • Backstay insulated for SSB radio


Safety Equipment
  • 406 EPIRB w/ GPS 
  • Bilge high water alarm
  • 6 Man Givens life raft (needs re-certification)
  • (2) rail mounted retractable jacklines
  • Sea Drogue 
  • Man overboard pole
  • PFD's
  • Lifesling


Electronics and Navigation

Adagio is LOADED with electronics and navigation equipment.  There is plenty of redundancy built into all systems. 

  • Furuno RPD-149 10" Color plotter/ radar mounted at helm. 
  • Numerous Navionics charts for most of the world
  • B&G Wind/ Speed/ depth w/ repeaters at both helms (wind transducer needs to be mounted- New in box)
  • Furuno 502 Autopilot w/ Navpilot-511
  • TMQ AP50 Autopilot (needs new fluxgate compass)
  • Icom M-710 SSB and AT-120 Tuner w/ antenna on backstay
  • Furuno FA-30 AIS class B transponder 
  • Raytheon R20XX Radar (24NM- CRT Display)
  • Furuno 24NM Radar dome (displayed on RPD-149)
  • West Marine VHF at helm
  • Uniden UM525 VHF w/ wireless speaker/mic
  • Furuno BBWX1 satellite weather 
  • Furuno NX-300 Nav-Tex weather receiver
  • Iridium satellite phone
  • ACR Satfind 406 EPIRB w/ internal GPS
  • 13" LCD television in saloon 
  • Netgear wireless router
  • Bullet WiFi antenna mounted on arch


Mechanical
  • Ford Sabre 80HP diesel (freshwater cooled) REBUILT IN 2015!  (15 hours SMOH)
  • 6.5KW Phasor Generator (2016 Hours)
  • Balmar 160A Alternator w/ External regulator 
  • Racor dual filter system
  • Fuel polishing system
  • Borg Warner transmission
  • Two completely independent steering systems.  Pilothouse is hydraulic, cockpit is mechanical (for redundancy)
  • 1 3/4" stainless shaft 
  • 3 Blade MaxProp feathering propeller (NEW 2013)
  • Dripless packing gland (NEW 2014)
  • Two Rule 3500 bilge pumps
  • Seachest raw water manifold
  • Spectra Catalina 300 watermaker (12GPH on 12V)
  • Isotemp 6 Gallon water heater (NEW 2015)


Electrical

Adagios Electrical system is impressive.  There are multiple charging sources built into the vessel. 

  • 120/240V A/C system 
  • (6) rigid solar panels (mounted on doghouse and arch)
  • (2) BlueSky MPPT solar controllers
  • (2) AirX Wind generators
  • Phasor Generator 6.5KW (2016 hours)
  • (2) Magnum 2800W inverter/chargers w/ remotes
  • Isolation transformer 
  • 183AH (4D) gel starting battery 
  • (8) West Marine 6V batteries (720 AH)
  • Battery isolator
  • Electrolysis meter 
  • 110V and 240V 50' 50A shorepower cordsets


Additional Equipment
  • 10' Achilles RIB w/ 20HP Tohatsu 4 stoke outboard 
  • Spares for almost everything on board
  • Spare membrane and enough pre-filters for watermaker to last 1 year
  • Neat and well laid out electrical system
  • Magma BBQ grill w/ dedicated 20lb aluminum propane cylinder
  • Removable section of bow pulpit for boarding from bow
  • Forward and aft flood lights on stern arch
  • Folding teak cockpit table
  • Teak grates in cockpit sole
  • Folding Lewmar destroyer wheel
  • Additional swiveling chairs for nav station. (Not pictured)
  • Tank tender fluid level monitor
  • Bilge pump counter


Brokers Remarks

This Kanter is literally loaded with equipment and spare parts.  There is too much to fully inventory.  The boat can be easily single-handed from the cockpit.  All lines lead aft, and the electric mainsail furler makes sail handling a breeze. 

The Ford Sabre Diesel was just rebuilt in June 2015.  Take a look at the engine photos in the gallery.  She runs smooth and quiet. 

Her decks were repainted in July 2015.

Make an appointment to see her in person.  She is an impressive world cruiser. 

 

Proven Circumnavigating Voyager

This Ted Brewer center cockpit design is a true passagemaker.  She was built by the well-respected metal boat builder, Kanter Marine of Ontario Canada.  Kanter Marine is still building metal boats designed to last a lifetime today.  Her steel hull construction is powerful and proven. 

She was designed and constructed to be a world voyager and has already successfully circumnavigated the globe.  In 2009-2010, she sailed across the Atlantic again.  During that time, she was cruised in Europe and ultimately the lower half of the Caribbean.   Her present owners have enjoyed year-round cruising of Florida and the Bahamas.  She is set up for total independence and comfort while enjoying far away anchorages around the globe. 

Adagio was just hauled out in 2014.    Her bottom side was sandblasted, primed and repainted.  

 

She is heavily equipped, but some highlights include:

  • Ford Sabre Diesel freshly rebuilt in 2015!!
  • 480 Gallon Fuel Capacity
  • Electric in-mast furling controlled with foot switches in cockpit  
  • Numerous redundant electrical and electronic systems 
  • Central Air Conditioning 
  • 6.5KW Phasor Generator (2016 hours)
  • Six Solar Panels w/ two MPPT controllers 
  • Two Wind Generators
  • Spectra Watermaker (12GPH on 12V)
  • Maxprop folding 3 blade propeller (NEW 2013)
  • Achilles w/ 10' Dinghy w/ 20HP outboard
  • Heavy Stainless Steel tube lifelines
  • 720AH gel house bank (8) 6V batteries
  • Deck Repainted July 2015
  • Chairs Recovered 2015
  • All New Carpet 2015
  • New ProFurl Furler 2015
  • Recent Survey Available

 



Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Watch Video:

  • Kanter 50 Video

 

location:

Presented by

Kevin Barber 6 Listing(s)

Kevin Barber

Search By


QUICK SEARCH BY:

Category

Buyer Services

Featured Yacht

Edwards Yacht Sales

Top
Loader